Existing Crawlspace Liner
This is the existing crawlspace liner prior to being removed and replaced with CleanSpace
Floor Joists
The existing floor joists were supported by 6x6 posts
Bottle Jack
The existing floor joist was being supported by a bottle jack.
Regrade
The existing dirt floor of the crawlspace will be regraded to allow water to flow directly to the SmartSump system.
CleanSpace
Once the existing crawlspace floor was regraded for drainage, CleanSpace is laid down to keep humidity low, your crawlspace bright, and to isolate your home from the ground.
SmartSump
To help maintain a dry crawlspace, it's essential to have a sump pump in place. The SmartSump features an airtight floor drain designed to handle any leaks. Additionally, the WaterWatch Alarm is equipped with a pocket that fills first during a leak or power failure, providing you with timely alerts.
SaniDry Sedona
The SaniDry Sedona has a whopping 100 pints per day capacity and will move over 300 cubic feet of dry air per minute around your crawlspace or basement.
SmartJack
High humidity in your crawlspace or basement can cause wood beams and joists to weaken and sag. This can also be caused by weak foundation soils and improper spacing of joists and beams. The way to solve this issue The SmartJack system effectively tackles weak foundation soil by establishing a robust base of engineered fill that evenly distributes the home's weight. Galvanized steel columns are precisely cut to size and anchored onto a cast aluminum footing, which is then securely attached to the existing girders or additional beams.