Old Entrance Door to Crawl Space
This old door to the entrance of the crawl space was replaced with an EverLast door for maximum protection against outside elements.
Unblocked Vents
Unblocked vents allow outside elements to come in. Blocking the vents off from the inside will prevent anything from entering the space.
Falling insulation
All insulation was removed from the crawl space before installing CleanSpace Technology.
Hygrometer Reading
A Hygrometer is used to determine humidity levels within the crawl space. Values should be between 55-59% at all times.
Black Mold
When moisture levels are extreme in a crawl space, black mold has an opportunity to grow and form. Black mold is dangerous when inhaled and must be treated and removed.
Falling Insulation
All insulation was removed before installation of CleanSpace Technology.
Old Liner
In order for CleanSpace Technology to be properly installed, the old liner was removed.
Clear Space
All debris and insulation were removed giving the DryZone team a clean slate to begin new installations.
Regraded Ground
The ground was regarded to ensure a level ground for CleanSpace Technology to be installed.
Drainage Matting
Drainage matting is installed before CleanSpace Technology for an added barrier against water.
Drainage Matting
Drainage matting is another protective barrier against water in a crawl space.
More Drainage Matting
CleanSpace tape is used to hold the drainage matting in place.
CleanSpace Technology
CleanSpace Technology is also installed on the walls of the crawl space for maximum protection.
Wrapped piers
CleanSpace Technology must be wrapped around the piers in a crawl space to ensure the entire area is protected from water.
Lined Entance
CleanSpace Technology also lines the entranceway for the greatest level of protection
EverLast Door
A new EverLast Door was installed for ultimate protection from outside elements and unconditioned air.
SaniDry Sedona Dehumidfier
A SaniDry Sedona dehumidifier paired with a condensate pump will help ensure humidity levels remain at the recommended values-55-59%.